item2

Home | Brokerage | Services | News | About | Contact
JBoats Southwest 2014

item8

Dimensions

ft/lb

m/kg

LOA

34.50

10.51

LWL

29.50

8.99

Beam

11.00

3.35

Standard Draft

6.50

1.98

Standard Ballast

3,400

1,542

Displacement

7,750

3,515

Engine

18 hp

18 hp

100% SA

577

53.60

I

40.60

12.37

ISP

42.10

12.83

J

13.50

4.12

P

41.50

12.65

E

14.60

4.45

SA/Dspl

24

24

Dspl/L

135

135



Hull & Construction

• Lloyd's approved, aircraft grade AL600 epoxy coated CK57 (6 lbs./cu.ft.) Baltek end-grained balsa laminate construction using polyester resin and biaxial glass fabrics. A vinylester resin barrier coat allows a ten-year hull warranty against blisters.

• White gel coat hull with single (1.50" to 3.00") tapered bootstripe.

• Large sit-in cockpit with 6.5' seats with backrests, suitable for cockpit cushions.

• One lazarette locker and two cockpit seat lockers w/flush spring loaded latches.

• Swimming and boarding platform sculptured into transom with integral ladder.

• Cockpit coamings 2.5" high over sidedecks to channel water aft.

• Molded companionway slide-in seahood w/dodger boss/instrument pod.

• ORC size molded-in foredeck toe-rails.

• Stainless steel handrails on cabin trunk.

• GRP molded main structural bulkhead, bonded fore & aft on hull and deck as support for shroud chainplates with single opening to forepeak.

• Fore & aft and transverse keel support beams vacuum bagged to hull.

• Fabricated aluminum mast step with transverse beams fastened to main bulkhead.


Keel & Rudder

• Faired lead & antimony fixed 6.5' draft, fin keel with bulb bolted to a deep molded stub. (5.5’ shoal draft option)

• Balanced spade rudder constructed using "E" glass.

• SS shaft mounted in self aligning rudder bearings.

• Composite tiller with adjustable hiking handle.


Spars & Rigging

• Tapered aluminum, fractional-rig mast with double airfoil spreaders, plus boom in anodized finish (powder coat white optional)

• Nitronic 50 rod rigging with calibrated turnbuckles.

• Custom 4.25" diameter, clear coated carbon fiber, retractable bowsprit with 1:2 under-deck Harken launching system. 

• Integral hydraulic backstay adjuster with 9.5" throw for -6 rod backstay.

• Rigid boomvang with integral cleating.

• Main boom with #1 reef stopper to port and #2 reef sheave on starboard side to double as Cunningham.

• 12:1 internal mainsail outhaul on boom.

• Complete running rigging package


Deck Hardware

• 46:1 two speed self tailing primary winches.

• 35:1 two speed self tailing secondary winches on cabin trunk.

• Double sheave deck organizers (P&S) recessed in dodger spray shield molding.

• Two lock-in winch handles (10").

• Two PVC winch handle holders

• Aluminum mast collar.

• 4 mast mounted turning blocks

• Two double rope clutches aft on the cabin top. Port is main halyard and jib halyard.  Starboard is for cunningham/reef and spinnaker halyard.

• Two jib sheet cars on a 3 foot 32mm clear anodized "T" track (P&S) with aft end stops.

• Camcleat for headsail furler.

• Side mounted rope clutch for spinnaker tack line.

• Traveler track recessed in cockpit seat with 4:1 adjustment system.

• 6:1 racing mainsheet system led to a center-mounted heavy duty swivel base with single ratchet and camcleat aft of traveler; and a 24:1 fine tune system cleated to a swivel base with camcleat on front side of traveler.

• Custom double-rail stainless bow pulpit and dual corner stern rails with transom gate.

• Low profile headsail furler mounted on stemhead with control line aft to port side of cabin trunk where tail can be used on primary winch.

• Tapered lifeline stanchions with heavy duty deck plates.

• Four 4-bolt mooring cleats.

• Single foot blocks to lead spinnaker sheets to the cockpit or cabin house.

• Cams for lazy spin sheets, mounted aft of primary winches.

• Two heavy duty "U" bolts aft for spinnaker sheet blocks.

• 20x20 articulated foredeck hatch.

• 10x10 vent hatch in head.

• Opening ports in sides of cabin trunk.  

• Light weight, cored, low-profile companionway sliding hatch and acrylic offshore dropboard with inside/outside opening hasp.

• Cockpit operated bilge pump.

• Three 12"x 20" polypropylene mesh line bags.

• Custom SS chainplates, stemhead and backstay tang.

• Main Cunningham/Reef block on reef hook for single line reefing system.


Auxiliary Power

• Yanmar 3YM20 20 hp, 3 cylinder, diesel engine with  80 amp alternator.

• Two-blade 15” folding prop.

• Yanmar engine instrument panel in cockpit with acrylic cover.

• Engine throttle control with neutral safety switch.

• 12-gallon alloy fuel tank with baffles and inspection/clean out port.


Systems

• One 90 amp deep-cycle battery.

• On/Off battery switch.

• Electrical panel w/circuit breakers.

• LED Navigation lights.

• All chainplates with lightning grounds.

• Five swiveling halogen reading lights.

• One fluorescent light in head.

• Seahood pre-wired for instruments with 6 wire 22 gauge cable to nav station

• Automatic bilge pump w/check valve & panel switch for manual operation


Interior

• Off-white laminated paneling with varnished teak trim oval door opening and white door.

• Teak and holly synthetic high-wear cabin sole.

• Two-tone (beige) molded nonskid floor in head area.

• Teak trimmed backrest outboard of each settee berth.

• Marine head with 14 gal holding tank and "Y" valve.

• Molded sink with overboard drain in head.

• Holding tank overboard discharge manual pump.

• Teak trimmed storage bin to starboard of head.

• Choice of acrylic fabrics for settee cushions.

• Vinyl liner on main cabin & head overhead and hull.


Options

• Two Tone Deck.

• 1/2" Cove Stripe with "J" Insignia.

• Custom Wheel Package: Edson Racing Series 48" Black Aluminum Wheel with Natural Leather Grip; Ritchie 5" Binnacle Compass with Light; Custom GRP Molded Pedestal with SS Guard; Aluminum Emergency Tiller. 

• Comfort Group Package: Dual Purpose Sunbrella 3" Cockpit/Settee-Backrest Cushions to match below cushion color combination  (4) Custom Acrylic

• Covered AC Hose Lifeline Covers for Helmsman to Match Dodger Color; Mainsail Cover to Match Dodger with J/105 Logo.

• Systems Group Package: Sink in Vanity Counter of Forward Head with Foot Pump -  plumbed and led to the galley sink discharge 1” Thru hull with inline check valve, Fresh Water Tank Under Starboard Berth with Deck Fill; 2-Burner stove. 

• Additional 90 Amp Battery.

• Shoal Bulb Keel with 5.5' Draft.

• V-berth Cushions.

• Ports on Aft Face of Cabin House (2). 

• Stainless Grab Rails in Main Cabin.

• Thurston Dodger with Side Curtains.


Notice

Specifications are subject to change prior to delivery due to deletions, additions or revisions in quantities, brand or design at the sole discretion of J/Boats, Inc. Newport, RI.

item4 item3