item6
hdr2014

Home | Brokerage | Services | News | About | Contact
JBoats Southwest 2014

Dimensions

ft/lb

m/kg

LOA

24.00

7.32

LWL

20.00

6.10

Beam

8.90

2.71

Standard Draft

4.00

1.22

Standard Ballast

950

431

Displacement

3,100

1,406

Engine

outboard

outboard

100% SA

261

24.25

I

26.25

8.00

J

9.50

2.90

P

28.00

8.53

E

9.75

2.97

SA/Dspl

20

20

Dspl/L

173

173



Construction

• End grained balsa core construction with hand laid‑up glass in both hull & deck.

• Vinylester resin in outer hull skin for 10 year transferable blister warranty.

• Full structural main bulkhead glassed to hull & deck.

• Heavy duty stainless chainplates bolted to main bulkhead.

• Anodized aluminum mast bearing beam, glassed to hull and grounded to keel.

• Low maintenance molded V‑berth unit bonded to the hull to form watertight compartment.

• Aft storage compartments port and starboard with access from below.

• Self‑bailing cockpit.

• White gel-coat hull and deck.

• Molded positive traction non‑skid surface on deck.

• Hull and deck joint bonded with Plexus structural adhesive.

• ORC sized white thermo‑plastic toe rail running full length of the deck both sides.


Keel & Rudder

• Lead & Antimony fin keel finished in epoxy primer.

• Near minimum weight faired transom-hung rudder.

• Heavy-duty SS rudder gudgeons and hardware.

• Custom laminated tiller with hiking stick.


Spars & Rigging

• Tapered, anodized aluminum racing mast with airfoil spreaders, thru‑bar spreader bracket, Gibb "T" terminals, and black measurement bands.

• Three sets of holes at 1/2" intervals in mast bearing beam with two stainless fastpins for easy adjustment.

• 1 x 19 Stainless Standing rigging with open body turnbuckles.

• Anodized aluminum boom with Harken 5:1 internal outhaul and adjustable reef line.

• Complete running rigging package


Deck Hardware

• Waterline Systems optimized hardware layout.

• (2) Two speed primary winches mounted on molded winch pads with

• Winch handle and plastic holder.

• (2) black anodized jib tracks, with adjustment holes and two jib block on cars.

• (2) black anodized genoa tracks, with adjustment holes and cars.

• Aluminum spinnaker pole.

• Stainless bow and stern pulpits with 20" stanchions and single lifelines.

• Foredeck hatch mounted with lid opening forward.

• White main hatch with molded seahood which slides on white PVC runners.

• Seahood inspection port for lifting strap access to keel.

• Bow mooring eye and two bow chocks.

• Heavy duty stainless stemhead fitting with snap shackle for genoa tack.

• Two four bolt mooring cleats aft.

• Bow and Stern navigation lights.


Outboard Motor

• Lightweight fixed outboard bracket.


Interior

• Teak and holly synthetic cabin sole.

• (2) adult size settee berths with large storage area below.

• Large forward V‑berth, with two access boards above mast step area and three inspection ports for access into v‑berth compartment.

• Waterproof interior lights, 3 function electrical panel.

• Molded sink with one flexible water tank in cabinet below.

• Dry goods storage cabinet above sink.

• Cabinet doors (3) are watertight ports.

• Molded open storage shelves above settee berths.

• Molded step box with lid.

• Stainless lifting bar bolted to keel for hoisting.

• Acrylic companionway board on white PVC runners.


Notice

Specifications are subject to change without prior notice or obligation, J Boats and/or Waterline Systems reserves the right to periodically upgrade these specifications through additions, deletions and substitutions.

youtube fb