J\/80<\/a> Equipment<\/h3>\nHull & Deck<\/strong><\/p>\n\n- Composite hull and deck of GRP balsa sandwich with E-glass fabrics, additional reinforcing in way of highly loaded hardware.<\/li>\n
- Vinylester and ISO NPG gelcoat in hull for osmotic gelcoat blister protection.<\/li>\n
- Molded GRP main bulkhead to absorb the direct loads of the shrouds and mast compression.<\/li>\n
- Mast step loads are distributed to aluminum frame fastened to the main bulkhead.<\/li>\n
- Hull is reinforced in way of keel with several transverse molded stringers.<\/li>\n<\/ul>\n
Deck Hardware<\/strong><\/p>\n\n- Large modern cockpit with molded foot braces on centerline.<\/li>\n
- Non slip finish to all horizontal deck surfaces in white.<\/li>\n
- Molded Toe-rail forward.<\/li>\n
- Bolts, screws and fitting are all made of stainless steel, marine grade anodized.<\/li>\n
- Stainless steel forestay attachment plate.<\/li>\n
- Stainless steel pulpit single lifeline.<\/li>\n
- \u201cU\u201d bolt on the foredeck.<\/li>\n
- Stainless steel chain plates for cap shrouds, lower, shrouds and backstay.<\/li>\n
- Opening hatch (420 x 420 mm) mounted on cabin trunk forward of mast.<\/li>\n
- Two black anodized jib T tracks with cars.<\/li>\n
- Boom vang system (12:1) with swivel mounted cleats, on both sides of the coach roof.<\/li>\n
- Mainsheet traveler with coaming mounted (2:1) control line, cleats.<\/li>\n
- Mainsheet system (5:1) with swivel cam cleat and ratchet block on cockpit sole.<\/li>\n
- Cleats and blocks for backstay adjustment (4:1) led forward in cockpit to port and starboard.<\/li>\n
- Two 30:1 primary winches with cam cleats.<\/li>\n
- Internal bowsprit launching line led aft through fairleads to cabin trunk cam cleat.<\/li>\n
- Bullseye fairleads for furler control line (port with cam cleat) and tack line (starboard) to cabin side mounted clutch.<\/li>\n
- Two halyard storage bags shipped loose.<\/li>\n
- Spinnaker sheet blocks outboard of winches and aft.<\/li>\n
- Two stern pulpits.<\/li>\n
- Single continuous lifeline.<\/li>\n
- One fixed cabin window on each side of cabin side.<\/li>\n
- GRP main sliding hatch with acrylic one piece offshore drop board.<\/li>\n
- Winch handle.<\/li>\n
- Bow and stern running lights.<\/li>\n<\/ul>\n
Keel & Rudder<\/strong><\/p>\n\n- Low VCG keel cast from lead and antimony, faired and finished with an epoxy primer and secured by way of stainless steel bolts to the integral molded hull sump.<\/li>\n
- Reinforced FRP rudder on transom with stainless steel fittings.<\/li>\n
- Laminated varnished wood tiller, with adjustable tiller extension.<\/li>\n<\/ul>\n
Spars & Rigging<\/strong><\/p>\n\n- Mast and boom in anodized aluminum.<\/li>\n
- Headsail roller furling on headstay.<\/li>\n
- Two pairs of swept spreaders.<\/li>\n
- Stainless steel wire standing rigging with turnbuckle adjusters.<\/li>\n
- Backstay with adjustment tackle led to both sides of the cockpit.<\/li>\n
- Complete running rigging package.<\/li>\n<\/ul>\n
Outboard Motor<\/strong><\/p>\n\n- Optional owner supplied, minimum 3.5hp long shaft recommended.<\/li>\n
- Low transom suitable for direct mounting of a 3 or 4 hp outboard.<\/li>\n<\/ul>\n
Interior<\/strong><\/p>\n\n- Removable cabin sole.<\/li>\n
- Molded settee berths with access to storage below.<\/li>\n
- Large forward V-berth platform with two access panels above mast step.<\/li>\n
- Large removable molded step with space for an outboard and cooler to be stored aft.<\/li>\n
- Crane lifting bar integral to keel bolt system.<\/li>\n
- Interior reading light.<\/li>\n
- Electrical panel.<\/li>\n
- Battery box with straps (battery owner supplied).<\/li>\n<\/ul>\n","protected":false},"excerpt":{"rendered":"
J\/80 Equipment Hull & Deck Composite hull and deck of GRP balsa sandwich with E-glass…<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_kad_blocks_custom_css":"","_kad_blocks_head_custom_js":"","_kad_blocks_body_custom_js":"","_kad_blocks_footer_custom_js":"","_kadence_starter_templates_imported_post":false,"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"footnotes":""},"categories":[92],"tags":[],"class_list":["post-3891","post","type-post","status-publish","format-standard","hentry","category-j-80-specifications"],"yoast_head":"\n
J\/80 Equipment - JBoats Southwest<\/title>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\t\n\t\n\t\n